For best results, make sure you always have a cartrige in your Epson printer, even an empty one will do otherwise the ink will begin to gel and will require multiple cleaning routines to clear.
Always refill before you are completely out of ink.
You will need to purchase a chip resetter.
Without a chip resetter, these cartridges cannot be effectively refilled.

Instructions:

1.There are 3 holes at the top which are the breather holes and 3holes in the centre which is where you refill the cartridge. Pierce the holes with a needle one colour at a time make sure you pierce the top and the centre hole.

2. Screw a needle on to the syringe and draw up 5ml of ink.

3. Insert the needle into the fill hole (through the label). Slowly inject the ink into the sponge. It is a good idea to withdraw the needle a little at a time while filling, in order to get the whole sponge filled with ink. apply some tape over the holes and repeat the process untill you have filled all 3 chambers

4. Seal the filling holes with a piece of tape to keep the cartridge from leaking.


.

Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.

If necessary leave cartridge in printer for up to 24 hours.

Back   Main