***IMPORTANT NOTICE*** Do not try printing with your cartridge completely out of ink, you could damage the printhead. Inkjet printers work by heating up a resistor inside the printhead, which heats up the ink before it is sprayed onto the paper. If there is no ink to keep these cool, it is possible to fry them.

Always refill before you are completely run out of ink.

Instructions:

1. Pierce both holes on top of the cartridge. The top hole is the breather hole and the centre hole is the refilling hole
2. Screw a needle on to the syringe and draw up 10ml of ink.
3. Insert the needle into the fill hole (through the label). Slowly inject the ink into the sponge. It is a good idea to withdraw the needle up a little at a time while filling, in order to get the whole sponge filled with ink.
4. Seal the filling hole with a piece of tape to keep the cartridge from leaking.


Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.


If necessary leave cartridge in printer for up to 24 hours.

A Refill Kit should include Ink plus the following:
1 Syringe and Needle

Back   Main